Chain conveyors are used to convey materials horizontally or at an inclination not exceeding 10 degree.
The Cremach make Chain Conveyors are dust proof with a bolted design, having steel plate casting, screw chain tensioning support, conveying chain wheel of steel, shaft supported on both sides in plummer block along with self aligned ball bearings, exchangeable wear rail provided at top for chain guide, conveying drag bush chain with a sufficient breaking load with special steel & case hardened parts. Necessary inlets & outlets are provided. These chain conveyors run on horizontal foot mounted geared motor along with chain drive parts etc.
Feature of Chain Conveyor:
- Top mixing precision and high mixing efficiency.
- Self – cleaning chain conveyor with Nylon Pads.
- Limit switches and speed sensors to avoid choking and material overflow.
Bucket elevators are used to convey grains, mealsand other raw materials vertically.
The Cremach make Bucket Elevators are dust proof with steel fabrication, rubber lined fabric (M-24 grade 4 ply nylon fabric), pressed steel buckets, elevator bottom boot having provision for fitting either side of inlet, screw type belt tightening device, top hood with rubber lagged crown pulley, and wear resistant front plate and a bottom pulley cage type. Elevators are provided with necessary cleaning slides, inspection windows, casing retention frame and leg spacers. The Elevator is run by a foot mounted horizontal geared motor, and chain type direct coupling drive part. For each elevator one filter bag is provided at bottom between legs. Additional aspiration can be installed for higher efficiency and dust free operation.
Feature of Bucket Elevator:
- Dynamically Balance Drum Top and Bottom drums for smooth operation.
- Bucket Size varies from 6” – 14” with capacity ranging from 8 TPH to 30 TPH.
- Adjustable plate at discharge for belt tensioning adjustment.
- Inspection Window at the discharge end for visual observation.
- Belt alignment sensor and speed sensors for continuous operation monitoring.
Screw conveyors are used to convey/distribute grains, meals and other raw materials horizontally or at an inclination (maximum 10 Deg.) for lengths not exceeding 20 M.
The Cremach make screw conveyors are constant/variable pitch with dust proof design, self-lube plummer block units, intermediate hanger bearing with maintenance–free special nylon bushes, screw or paddle flights of steel having a uniform/varable pitch welded on screw shaft along with necessary inlet & outlet. Overflow flap at discharge end with limit switch is provided with a safety limit switch. The conveyor is to be run by foot mounted horizontal geared motor and chain type direct coupling.